Standard Accessories:
- Tow slides for allachment mounting
- Set of tool holders with figure culling bits.
- Electric Motor
- Push bullon starter provided with over load tr
- Set of operating keys
- Set of operating spanners
- Filler gauge
Optional Accessories:
- Anti vibration pads
- Hand pushed straight feeding allachment
- Circle CUlling allachment (Inside I Outside)
- Nibbling tool
- Louver CUlling tool
- Heading tool
- Rectangular notching tool
- Dishing tool
- flanging tool
- Slot CUlling tool
- Punching tool
- folding tool
- Ball top table
Specification:
| CAPACITY | MODEL | ||||
| PN·3 | PN·5 | PN·8 | |||
| MILD STEEL 45 Kg ./mm2 | MILD STEEL 45 Kg ./mm2 | MILD STEEL 45 Kg ./mm2 | |||
| 1. SHEARING STRAIGHT CUTIING | From the edge | mm | 3.2 | 5 | 8 |
| Inside with slarting hole | mm | 3.2 | 5 | 8 | |
| Sheet without starting hole | mm | 2.5 | 4 | 6 | |
| 2. NIBBLING | From the edge | mm | 2.5 | 4 | 6 |
| Inside wilh starting hole | mm | 2.5 | 4 | 6 | |
| Sheet wilhout starting hole | mm | 2 | 3 | 4 | |
| 3. RECTANGULAR NOTCHING | Sheet thickness / width of notch | mm | 2/8 | 3110 | 4/12 |
| 4. FIGURE CUTIING | Sheet thickness | mm | 2 | 3 | 5 |
| 5. SLOT CUTIING | Sheel thickness / width of slot | mm | 2.5/8 | 4/10 | 5/10 |
| 6. LOUVER CUTIING | Sheet thickness | mm | 2.25 | 3 | 4 |
| 7. BEADING | Sheet thickness / depth of bead | mm | 2/4 | 2.5/5 | 3/6 |
| 8. FOLDING | Sheet thickness / depth of fold | mm | 2/6 | 2.5/8 | 3/10 |
| 9. FLANGING | Sheet thickness / height of flange | mm | 2/8 | 3/12 | 3/15 |
| 11. PUNCHING | Sheet thickness | mm | 1.5 | 2.5 | 3.0 |
| 12. CIRCLE CUTIING OUTSIDEIINSIDE | Sheet thickness | mm | 2 | 3 | 5 |
Maximum circle diameter upto 75% of throat depth of the corresponding model can be cut with
inside circle cutting attachment
Centre punch mark is necessary for sheet thickness upto 2mm
For sheet above 2mm thickness, centre locating hole of 5mm diameter is required
Note: All tools except set of tool holders with figure cutting bits are optional
Optional tools can be procured later, as and when required
Machine Specifications:
| Throat depth | mm | 900 | 1000 | 1250 |
| Maximum circle dia can be cut from square blanks | mm | 740 | 830 | 1000 |
| Net Weight (approximate) | Kg | 700 | 1250 | 2200 |
| Length of stroke | mm | 1 to 8 | 1.5 t0 9 | 2 to 10 |
| No of strokes per minute | No. | 1440 | 1440 | 900 |
| Maximum tool lift | mm | 15 | 15 | 25 |
| Motor 3 phase / 440 V | H.P. | 2 | 3 | 5 |
