Light Duty Lathe Machine-1


 

Technical Specification:

Capacity Deta LM -1 LM -2 LM -3
Length of Bed 1370 mm (4'-6") 1600 mm (5' - 3") 1800 mm (6')
Center Height 175 mm (7") 175 mm (7") 175 mm (7")
Maximum Swing Over Bed 330 mm (13") 330 mm (13") 330 mm (13")
Maximum Swing Over Carriage 200 mm (8") 200 mm (8") 200 mm (8")
Maximum Swing in Gap 275 mm (20") 275 mm (20") 275 mm (20")
Length of Gap in front of face plate 145 mm (5.3/4") 145 mm (5.3/4") 145 mm (5.3/4")
Admit between Centers 675 mm (27") 900 mm (36") 1125 mm (45")
Width of Bed 235 mm (9.1/2") 235 mm (9.1/2") 235 mm (9.1/2")
Length of Gap 120 mm (4.3/4") 120 mm (4.3/4") 120 mm (4.3/4")
Spindle Nose Dia/Threads 60 mm x 6TPI 60 mm x 6TPI 60 mm x 6TPI
  2.3/8" x 6 TPI 2.3/8" x 6 TPI 2.3/8" x 6 TPI
Spindle Bore 40 mm (1.5/8") 40 mm (1.5/8") 40 mm (1.5/8")
Taper of Center MT-3 MT-3 MT-3
Spindle Speeds No. 8 8 8
Tail Stock Spindle Diameter 37 mm (1.1/2") 37 mm (1.1/2") 37 mm (1.1/2")
Travel 125 mm (5") 125 mm (5") 125 mm (5")
No. of Threads/Range Matric 15 0.5 to 6 Pitch 0.5 to 6 Pitch 0.5 to 6 Pitch
Inch. 30 4 to 45 TPI 4 to 45 TPI 4 to 45 TPI
Lead Screw Dialthreads 25 mm x4 TPI 25 mm x4 TPI 25 mm x 4 TPI
  1" x 4TPI 1" x 4TPI 1" x 4TPI
Power of AC Motor ph. Cycles 1 HP 1440 RPM 1 HP 1440 RPM 1 HP 1440 RPM
Weight (Approx) 470 kg. 520 kg. 540 kg.

Standard Accessories :- Chuck Plate, Change Gear Set for Inch & mm, Dead Sleeve, Dead Center - 2 & Motor Pulley.
Extra Accessories :- Taper turning Attachment, Coolant pump with tank & Fittings, Steady Rest, Follow Rest, Rear tool Post, Norlen Gear Box, Face Plate.

Note: (1) As improvement are constanty made in our machines, the above specifications are subject to change without notice and are not binding on us.
           (2) All Specifications are in millimeter and the conversion of mm. into inches is approximate.

Metal Working Machinery