Medium Duty Lathe Machine - 1


 

Capacity Deta MLM -1 MLM -2 MLM - 3 MLM -4
Length of Bed 1370 mm (4'-6") 1600 mm (5' - 3") 1800 mm (6') 2133 mm (7')
Center Height 228 mm (9") 228 mm (9") 228 mm (9") 228 mm (9")
Maximum Swing Over Bed 456 mm (18") 456 mm (18") 456 mm (18") 456 mm (18")
Maximum Swing Over Carriage 257 mm (10.5") 257 mm (10.5") 257 mm (10.5") 257 mm (10.5")
Maximum Swing in Gap 260 mm (26") 260 mm (26") 260 mm (26") 260 mm (26")
Length of Gap in front of face plate 127 mm (5") 127 mm (5") 127 mm (5") 127 mm (5")
Admit between Centers 558 mm (22") 787 mm (31 ") 1016 mm (40") 1320 mm (52")
Width of Bed 280 mm (11 ") 280 mm (11") 280 mm (11 ") 280 mm (11")
Length of Gap 127 mm (5") 127 mm (5") 127 mm (5") 127 mm (5")
Spindle Nose Dia/Threads 76 mm x 6TPI 76 mm x 6 TPI 76 mm x 6 TPI 76 mm x 6TPI
  3" x 6TPI 3" x 6TPI 3" x 6TPI 3" x 6TPI
Spindle Bore 52 mm (2.1/8") 52 mm (2.1/8") 52 mm (2.1/8") 52 mm (2.1/8")
Taper of Center MT-4 MT-4 MT-4 MT-4
Spindle Speeds No. 6 6 6 6
Tail Stock Spindle Diameter 50 mm (2") 50 mm (2") 50 mm (2") 50 mm (2")
Travel 125 mm (5") 125 mm (5") 125 mm (5") 125 mm (5")
Lead Screw Dia/threads 31 mm x 4 TPI 31 mm x 4 TPI 31 mm x 4 TPI 31 mm x 4 TPI
Weight ( Approx. ) 650 kg. 700 kg. 745 kg. 900 kg.

Standard Accessories :- Chuck Plate, Three Pin Guide, Change Gear Set for Inch & mm, Dead Sleeve, Dead Center - 2 & Motor Pulley.

Note (1) As improvement are constanty made in our machines, the above specifications are subject to change without notice and are not binding on us.
         (2) All Specifications are in millimeter and the conversion of mm. into inches is approximate.

Metal Working Machinery