Medium Duty Lathe Machine - 2


           Medium Duty Lathe Machine

Extra Heavy Features:

  • 229 mm Center Height
  • 203 mm Surface Width
  • 121 mm Compound Width
  • 121 mm Tool Post
  • Harden Ram
  • SKF Bearing

Technical Specification:

SPECIFICATION Medium Duty lathe Machine
MODEL No. TMLD-1 MODEL No. TMLD-2
Size (Length of bad) 4 l/2' -1370 6' - 1820
Height of centre 229 229
Width of bed 279 279
Max. Swing over bed 455 455
Max. Swing in gap 650 650
Admit between centre 600 1050
Lead Screw Dia / Threads 37 x4 TPI 37 x4 TPI
Range of Matric Threads 1to 6 Pitch 1to 6 Pitch
Range of Inch Threads 2to 24 TPI 2to 24 TPI
Cross Slide Travel 254 254
Drive V-belt Double V Belt B
Dia of Hole through spindle 53 53
Spindle Noise Dia / Threads 76.2/6 TPI 76.2/6 TPI
Tail stock spindie Dia /Taer 50/MT4 50/MT4
Tail stock spindle Travel 175 175
Required Powers 1.5 H.P. or 3H.P. 1.5 H.P. or 3H.P.

 

   Extra Heavy Medium Duty Lathe Machine

Extra Heavy Features:

  • 254 mm Center Height
  • 80 mm Spindle Bore
  • 203 mm Surface Width
  • 121 mm Compound Width
  • Harden Ram
  • 121 mm Tool Post

Technical Specification:

SPECIFICATION Extra Heavy Medium Duty lathe Machine
MODEL No. TMLD-1[3 1/8'] MODEL No. TMLD-2[3 1/8']
Size (Length of bad) 4 l/2' -1370 6' - 1820
Height of centre 254 254
Width of bed 279 279
Max. Swing over bed 500 500
Max. Swing in gap 700 700
Admit between centre 600 1050
Lead Screw Dia / Threads 37 x4 TPI 37 x4 TPI
Range of Matric Threads 1to 6 Pitch 1to 6 Pitch
Range of Inch Threads 2to 24 TPI 2to 24 TPI
Cross Slide Travel 254 254
Drive V-belt Double V- Belt B
Dia of Hole through spindle 80 80
Spindle Noise Dia / Threads 76.2/6 TPI 76.2/6 TPI
Tail stock spindie Dia /Taer 50/MT4 50/MT4
Tail stock spindle Travel 175 175
Required Powers 1.5 H.P. or 3H.P. 1.5 H.P. or 3H.P.

Other Specification:

1. Head stock design - Square
2. Change Gears -12 D.P. Teeth
3. Bed V- 31.75 mm & 25 mm
4. Cross Slide - 203 mm x 419 mm
5. Compound width 120 mm (4 3/4")
6. Tools Post Size 120 mm x 120 mm & Bolt 1/2"
7. Surface, Centre, Compound Screw Nul-C.I.
8. All Dial - Brass Metal

Standard Accessories:

  • Chuck Plate
  • MT·4 Dead Centre 2Nos.
  • Sleeve
  • Tool Post Key
  • Change Gear Set (Inch / mm)

Extra Accessories:

  • Steady & Follow Rest
  • Thrue Chuck
  • Real Tool Post
  • Dog Chuck
  • Motor
  • Reversible Switch
  • Taper Turning Attachment
  • Carriage Stope
  • Coolant Pump & Tank
  • Face Plater

Metal Working Machinery