Extra Heavy Features:
- 381 mm Sedal Length
- 203 mm Center Height
- 171 mm Surface Width
- 101mm Compound Width
- 101mm Tool Post
- Harden Ram
- SKF Bearing
Technical Specification:
| SPECIFICATION | MODEL No. TMLD-1 | MODEL No. TMLD-2 | MODEL No. TMLD-2 |
| Size (Length of bad) | 3 1/4"-1060 | 4 1/2'-1370 | 6' - 1820 |
| Height of centre | 203 | 203 | 203 |
| Width of bed | 240 | 240 | 240 |
| Max. Swing over bed | 380 | 380 | 380 |
| Max. Swing in gap | 550 | 550 | |
| Admit between centre | 450 | 685 | 1200 |
| Lead Screw Dia / Threads | 25.4 x4 TPI | 25.4 x4 TPI | 25.4 x4 TPI |
| Range of Matric Threads | 0.5 to 7 | 0.5 to 7 | 0.5 to 7 |
| Range of Inch Threads | 4to 48 | 4to 48 | 4to 48 |
| Cross Slide Travel | 140 | 140 | 140 |
| Drive V-belt | V·Belt B- | ||
| Dia of Hole through spindle | 42 | 42 | 42 |
| Spindle Noise Dia / Threads | 61.6/8 TPI | 61.6/8 TPI | 61.6/8 TPI |
| Tail stock spindie Dia /Taer | 38.1/MT3 | 38.1/MT3 | 38.1/MT3 |
| Tail stock spindle Travel | 120 | 120 | 120 |
| Required Powers | 1H.P. | 1H.P. | 1H.P. |
Dimension are in mm
Standard Accessories:
- Chuck Plate
- MT-4 Dead Centre 2 Nos.
- Sleeve
- Tool Post Key
- Change Gear Set (Inch / mm)
Extra Accessories:
- Steady & Follow Rest
- Real Tool Post
- Motor
- Taper Turning Attachment
- Coolant Pump &Tank
- Thrue Chuck
- Dog Chuck
- Reversible Switch
- Carriage Stoper
- Face Plate
Other Specification:
1. Head stock design - Square
2. Change Gears - 16 D.P. Teeth
3. Bed V- 31.75 mm
4. Cross Slide -196 mm x 381 mm
5. Compound width 102 mm (4")
6. Tools Post Size 102 mm x 102 mm & Bolt1/2"
7. Sunace, Centre, Compound Screw Nut-C.I.
8. All Dial - Brass Metal
