SPECIAL FEATURES:
- Connection link mounted on crank shaft for uniform load.
- Sufficient H.P. normal toques provided.
- General purpose V-block and punch supplied as standard accessories.
- Separate drive system for each connection link.
- Boltless pedal mounted on hexagonal bar.
STANDARD ACCESSORIES:
- Standard V-block and punch.
- Back gauge.
- Motor pulley.
- Motor mounting bracket.
- Pedal
- Flywheel &gear guards.
- Stroke counter.
- Manual lubrication &instruction manual.
OPTIONAL ACCESSORIES:
- Automatic lubrication system
- Goose neck punch &other toolings
- Electrical consist of electrical motor
- Wiring
- Control panel
- V-belt
- Push button pendent
- Main switch &reversible switch.
Capacities & Specification:
| MODEL | TON | BENDING CAP.IN M.S. LENGTHxTHICKNESS | CLEAR DISTANCE BETWEEN HOUSING | STROKE PER MINUTE | STROKE OF RAM M.M | RAM ADJ M.M | SHUT HEIGHT RAM STROKE DOWN | DEPTH OF THROAT M.M | MAIN MOTOR H.P/K.W | RAM ADJ.ELE MOTOR H.P/K.W | OVERALL DIMENSION IN M.M (APP) | ||
| LENGTH | WIDTH | HEIGHT | |||||||||||
| JSPB-1 | 20 | 1525Xl.6 | 1000 | 35 | 50 | 40 | 175 | 200 | 3/2.2 | 0.5/0.37 | 2000 | 1125 | 2300 |
| JSPB-2 | 25 | 2000Xl.6 | 1220 | 35 | 50 | 40 | 200 | 200 | 5/3.7 | 0.5/0.37 | 2300 | 1200 | 2500 |
| JSPB-3 | 40 | 2500X2 | 1550 | 35 | 60 | 50 | 215 | 250 | 7.5/5.6 | 1/0.75 | 2800 | 1500 | 2650 |
| JSPB·4 | 65 | 3125X2.5 | 1900 | 30 | 76 | 50 | 275 | 300 | 10/7.6 | 1.5/1.1 | 3400 | 1575 | 2750 |
| JSPB-5 | 65 | 2000X4 | 1370 | 30 | 76 | 63 | 275 | 300 | 10/7.6 | 1.5/1.1 | 2400 | 1575 | 2750 |
| JSPB-6 | 60 | 2500X4 | 1550 | 25 | 76 | 63 | 300 | 300 | 12.5/9.7 | 2/1.5 | 2900 | 1650 | 3025 |
| JSPB-7 | 100 | 3125X4 | 1900 | 25 | 76 | 80 | 300 | 300 | 15/11.2 | 2/1.5 | 3450 | 1875 | 3525 |
| JSPB-8 | 120 | 2500X6 | 1700 | 25 | 76 | 80 | 300 | 300 | 20/15 | 2/1.5 | 2900 | 1900 | 3550 |
| JSPB-9 | 150 | 2500X8 | 1700 | 20 | 80 | 100 | 300 | 300 | 25/18.7 | 2/1.5 | 3400 | 1900 | 3550 |
| JSPB-l0 | 150 | 3125X6 | 1900 | 20 | 80 | 100 | 300 | 300 | 25/18.7 | 211.5 | 3400 | 1950 | 3650 |
Note :- * All dimensions are in mm_ 'Power supply 400/440 volts, 3phase, 50 cycles.
* Bending Capacity based on (45 kg.lmm UTS m.s,) * Special sizes other than above offered on request.
* Through our technical department continual Development, Variations in size and performance are subject Without notice,
