1350 - 1650 Series Geared Lathes


  • Flame Hardened Bedways
  • A drop-out type worm box wilh finger tip control is used to engage feed frod for surfacing & sliding.
  • Hardened & Profile Ground Head Stock Gears
  • Hardened &Ground Alloy Sleel Spindle is mounted on 2 Taper Roller Bearings at the front & one Roller Bearing at rear end
MODEL 1350 /1 1350/2 1650 /1 1650 /2
Height for Centres 177 mm 177 mm 215 mm 215 mm
SWing over Bed 335 mm 335 mm 410 mm 410 mm
Swing over Cross Slide 205 mm 205 mm 255 mm 255 mm
Dist. between Centres 540 1000 1000 1500
Movement of cross Slide 260 mm 260 mm 300 mm 300 mm
BED        
Bed Type 2 Flat &2V 2 Flat &2V 2 Flat &2V 2 Flat &2V
Bed Width 230 mm 230 mm 265 mm 265 mm
MAIN SPINDLE        
Type &Size of Spindle Nose Threaded Dia 66 x 6TPI Threaded Dia 66 x 6 TPI Threaded Dia 66 x 6 TPI Threaded Dia 66 x 6 TPI
Taper Bore in Center Sleeve MT-4 MT-4 MT-4 MT-4
Spindle Bore 42 mm 42 mm 42 mm 42 mm
TAIL STOCK        
Spindle Diameter 45 mm 45 mm 45 mm 45 mm
Taper Bore in Spindle Sleeve MT-4 MT-4 MT-4 MT-4
TOP SLIDE        
Travel of Top Slide 140 140 140 140
Tool Shank Section 16 x 16 16 x 16 16 x 16 16 x 16
SPEEDS        
No. of Speeds 8/16 8/16 8/16 8/16
Range RPM 45 - 938 / 30 - 1250 45 - 938 / 30 - 1250 45 - 938 / 30 - 1250 45 - 938 / 30 - 1250
FEEDS        
No. at feeds 36 36 36 36
Range        
Longitudinal feeds per revolution 0.05 to 0.8 mm/ Rev. 0.05 to 0.8 mm/ Rev. 0.05 to 0.8 mm/ Rev. 0.05 to 0.8 mm/ Rev.
Transverse feeds per revolution 0.03 to 0.48 mm/ Rev. 0.03 to 0.48 mm/ Rev. 0.03 to 0.48 mm/ Rev. 0.03 10 0.48 mm/ Rev.
THREADS NO. RANGE        
Inch 36/4 to 60 TPI 36 / 4 to 60 TPI 36 / 4 to 60 TPI 36 / 4 to 60 TPI
Metric 38 / 0.2 to 6 mm 38/0.2 to 6 mm 38/0.2 to 6 mm 38 / 0.2 to 6 mm
ELECTRICALS        
Main Motor 2 HP 2 HP 3 HP 3 HP
Power Supply 3 Phase 3 Phase 3 Phase 3 Phase
OTHER DATA        
Gross Weight 1000 1100 1400 1550
FLOOR SPACE        
Occupied (L x W) 1850 x 940 2240 x 940 2150 x 1100 2650 x 1100
PACKING DIMENSION 1660 x 1000 x 1250 2240 x 1000 x 1250 2300 x 1000 x 1250 2850 x 1000 x 1250

STANDARD ACCESSORIES:

Hardened Guideway, Electric Motor, R/F SWitches, VBelts, Inch/mm Gears, Set of 2 Nos., Dead Centres with Centre Bush, Oil Can, Set of Allen Keys, Spanners &Instruction Manual.

OPTIONAL ACCESSORIES:

01-4 Camlock Spindle in lieu 01 A2I4Spindle, 16 Spindle Speeds Ranging tram 30 to 1250 RPM / 50 to 2000 RPM with super Precision Bearings, Starting Third Shall with instantaneous Foot Brake and Control Panel, Electric Coolant Pump with Tank & Fillings, Rear Tool Post with Tool Holder, Taper Turning Allachment, Rear Splash Guard, Face Plate, Sleady Rest, Follow Rest, Chuck Flange, Single Dead Stop tor Carriage, Micro Meter Carriage Stop, 5 Position Carriage Stop, Machine Lamp with Control Transformer, Ouick Change tool Post with Tool Holders, Tool Post Grinder (External/Internal), Key way Milling Attachment, 4 Jaw Dog Chuck, 3 Jaw True Chuck &RevolvinQ Centre.

Metal Working Machinery