Counter Lathe Machines


TECHNICAL SPECIFICATlON:

General Specifications Model No. SR-11 Model No. SR-22 Model No. SR-33
Size (Length of Bed) (1370 mm) 4'1/2" (1600 mm) 5'1/4" (1828 mm)6"
Height of Center (203 mm) 8" (203 mm) 8" (203 mm) 8"
Width of Bed (297 mm) 11 (297 mm) 11" (297 mm) 11"
Max. Swing over Bed (393 mm) 15'1/2" (393 mm) 15' 1/2" (393 mm) 15'1/2"
Max. Swing in Gap (609 mm) 24" (609 mm) 24" (609 mm) 24"
Admit between Center (575 mm) 23" (812 mm) 32" (1025 mm) 41"
Lead Screw Dia / Threads (32 mm) l'1/4"/4TPI (32 mm) l'1/4"/4TPI (32 mm) 1'1/4" /4TPI
Range of Matric Threads 1 to 6 mm Pitch 1 to 6 mm Pitch 1 to 6 mm Pitch
Range of Inch Threads 2 To 24 TPI 2 to 24 TPI 2 to 24 TPI
Cross Slide Travel (254mm) 10" (254mm) 10" (254mm) 10"
Drive V-belt Double V Belt B -72 Double V Belt B -72 Double V Belt B -72
Dia of Hole through Spindle (53 mm) 2'1/8" (53 mm) 2'1/8" (53 mm) 2'1/8"
Spindle Nose Dia / Threads (76 mm) 6 TPI (76 mm) 6 TPI (76 mm) 6 TPI
Tail stock spindle Dia / Taper (50 mm) MT- 4 (50 mm) MT- 4 (50 mm) MT- 4
Tail stock spindle Dia Travel (152 mm) 6" (152 mm) 6" (152 mm) 6"
Required Powers 1.5 HP or 2 HP 1.5 HP Of 2 HP 1.5 HP Of 2 HP

Standard Accessories:-

STeady & Follow Rest-Chuck Plate. - 2 Nos.
Mt-4 Dead Center - Sleeve - Tool Post key
- Change Gear Set (lnch/m.m).

Extra Accessories:-

Electric Motor - Tru Chuck - Dog Chuck - Reversible Switch
- Rear Tool Post - Face Plate - TaperTuning Attachment
- Coolant Pump With Tank & V-Belt.

Metal Working Machinery